Design. Build. Collaborate.
At MTech, we have in-house mechanical and plumbing engineers on our team to provide budget and estimating support. Partnering with us, you benefit from innovative and practical solutions supported by accurate costs, a better customer experience from start to finish as well as single source responsibility that produces superior design and construction. MTech has over 15 Registered Professional Engineers on staff in all departments from preconstruction to project managers to service.
MTech believes that a great company is more than just a good builder. Construction operations must add value beyond installing pipe and duct. To be truly effective, the operations team must act as part of the preconstruction, end user, and general contractor teams.
We’ll help you build smarter, more efficient environments. Browse our services and contact us at any of our three offices with any questions. We’d like to hear from you.
Design
In-House Engineering
MTech Mechanical is one of the only mechanical contractors in Colorado to have in-house mechanical and plumbing engineers to provide innovative and practical design solutions to meet your project needs. We work effectively with project teams to ensure design quality and code compliance and coordinate well with other trades. Our integrated team approach, early guarantee and single-source responsibility enable us to deliver superior design and construction on time and within your budget.
Our licensed, LEED certified, in-house engineers are available to collaborate and share resources. Our team members will address your questions and concerns and can communicate the scope and budget of your project at any time. They take pride in delivering the highest quality designs and most efficient systems for your unique building or process system.
Engineering Services
- Design and Construction documents
- Commissioning Support
- Energy Services Support
- Performance Verification
- Engineering Calculations
Preconstruction
At MTech, our preconstruction managers and special projects client representatives create quality design concepts for your unique project. During preconstruction, we establish the scope and budget of your build while planning superior engineering value.
Outlining the mechanical scope and associated costs of your project early in the process allows our team to make critical decisions about the mechanical systems we will implement. Our philosophy and team approach during preconstruction creates a platform for clear communication with the building owner, architect, and contractors to meet and exceed your expectations.
Preconstruction Services
- Cost and scope management
- Design concepts
- Value engineering
- Life cycle analysis
- Equipment and material procurement
- Estimating
- Design coordination
- LEED Certification
- Subcontractor selection
BIM/Virtual Construction
Building Information modeling (BIM) offers much more than traditional CAD design. MTech’s fabrication shop uses advanced software to create intelligent, interactive models that simulate real-world design using 3-D BIM. MTech has 15 experts on our team to meet your needs. We use the latest version of Revit, AutoDesk and Navisworks software.
As a mechanical contractor, MTech leads the coordination effort between teams on each project. BIM allows us to:
- Provide creative, accurate building solutions
- Eliminate waste and errors and avoid change orders
- Communicate more easily with all project teams
- Resolve jobsite disagreements with other trades
- Deliver Requests for Information (RFI) more efficiently
- Offer clients a complete, as-built digital reference model post-construction
Build
Large Construction
MTech believes that a great company is more than just a good builder. Large construction operations must add value beyond installing pipe, plumbing and sheet metal duct. Our large construction teams focus on projects greater than $2 million for the mechanical contract. Check out some of our large construction experience in a variety of sectors here.
We expect our construction teams to:
- Provide solutions and improved constructability
- Drive the schedule by being proactive and living up to our commitments
- Manage our equipment and tools effectively
- Provide a safe and productive work environment
Special Projects
Special Projects Excels at Getting Difficult Projects Done Quickly
Think your project can’t be done? Lack specifications or a clear project definition? The MTech Special Projects Group excels at solving problems. We look forward to complicated projects. Our creative engineers routinely help clients find solutions to seemingly impossible issues.
As a true design-build firm, we manage our own projects and provide value engineering. We can gather quality resources right away, define a scope and plan for your project and quickly implement a superior solution that fits your varying needs. We provide:
- resources for projects that range from a few dollars to $1 million dollars
- a single source of contact to ensure accurate communication from project start to finish
- streamlined processes that take the worry out of both design and build
- in-house experts who understand how entire building systems work together
- abundant expert personnel to help you mitigate risk and grow your business
To ensure a mutually beneficial partnership, our Special Projects team carefully evaluates each request and selects projects that will be mutually beneficial and match our skill set. You will receive proven system recommendations and quality craftsmanship each time you work with us. Whether you are building an addition, doing a remodel or need to start a ground-up project, we have the technical expertise and experience to design and engineer your special project from start to finish. Check out some of our special projects experience here.
Craft Trades: Sheet Metal, Pipefitting, Plumbing
Sheet Metal
We install sheet metal systems for a variety of industries including healthcare, pharmaceutical, laboratory, data center and office. MTech fabricates and preassembles ductwork for traditional rectangular and spiral systems as well as specialty installations. Our skilled team members handle a variety of pressure classes and materials including aluminum, stainless steel, fiberglass and reinforced plastics.
Pipefitting
MTech’s talented team members are experienced practicing their craft in a variety of construction environments with the most advanced materials and installation methods. We work with a variety of system materials and pipe joint methods:
Materials
- Carbon steel
- Copper
- Stainless Steel
- Polypropylene
Methods
- Traditional weld
- Soldered
- Grooved, pressed or fused plastic
Plumbing
MTech produces medical gas, storm, sanitary, and water distribution systems using a variety of materials and connection types. We install waste and water systems as well as systems for grease, hazardous lab waste and fuel oil. Where applicable, we are on the cutting-edge of renewable installations for solar, rainwater and gray water.
Prefabrication
Our on-site, 42,000 sqft shop located in Westminster is for fabrication and inventory where you will find complete coordinated prefabrication of entire mechanical systems. We can help you reduce field labor costs using the latest technology. Our skilled team members use a diverse array of equipment to provide custom metal fabrication for all your projects:
Stainless steel components for the pharmaceutical industry- Pipe support columns Custom atmospheric tanks
- Filtered exhaust hoods Miscellaneous metals
- Equipment platforms
- Fume hoods and high velocity capture hoods
- Laminar flow stations
- Custom grilles
- Custom drain pans
- Equipment frame and structural supports
- Stainless steel embedded items
Safety
SAFETY MOTTO: ONE TEAM, ALL IN
Our current EMR is 0.58. An Experience Modification Rate (EMR) of 1.0 is considered the industry average.
Job safety affects everything from project planning to the bottom line. Where safety is given a high priority, you can be assured that strict quality standards are also being upheld. MTech emphasizes safety as a part of our culture. Our management team communicates and enforces safety principles and our team members routinely demonstrate their commitment to safety.
This dedication shows in the field in each and in every phase of our projects. MTech recently received an ABC National Safety Excellence award for continued commitment to jobsite safety and for an exemplary safety performance program.
Communication promotes compliance
On the job, we ensure that all projects have MTech Safety Manuals, Safety Data Sheets, Federal and State standards, documentation support (accident/injury/near miss report forms, etc.) and that team members are trained to properly fill out the necessary documentation.
We emphasize compliance with all Safety standards through frequent on-site inspections, constant communication with field personnel and Safety Program updates.
Planning prevents issues
Before work begins, MTech develops a safety plan in conjunction with Project Management and Supervision. During the proposal process and after being awarded a contract, our Safety Director and Safety Manager formulate a site-specific Safety Program to enhance clients’ or prime contractors’ Safety Manuals. The program includes Safety Orientation and Procedures for both management and field employees.
Performance Verification
Performance verification gives you the peace of mind that all systems will work as intended upon project completion. Our in-house senior design and construction experts use a customized and documented process to verify that system operating features are properly designed, coordinated and installed with correct functional equipment components and automation controls.
This process expedites any third-party commissioning and can replace it to save costs. This is MTech’s version of a quality control and quality assurance process.
We review, observe, document and perform functional testing during the construction, acceptance and post-acceptance phases of your project and prepare and submit a final commissioning report as a last step.
Through this process, rework is eliminated, potential design errors are corrected and we fully-integrate owner training to meet all of your expectations.
Main Office:
12300 Pecos Street
Westminster, CO 80234
Eagle | Loveland | Colorado Springs